UMPS-Publications

Publications

PowerPoint Slide Shows

SmartFeed™ Presentation

This slide show provides an overview of the SmartFeed™ chemical conditioning system. (4.5 MB)

Steps to Success

This slide show demonstrates the SmartFeed™ Steps to Success methodology — advance testing, computer modeling, custom-woven Geotube® containers, real-time monitoring of polymer dosing and full reporting on individual Geotube® container performance. (5 MB)

These slide shows are packaged with the Microsoft PowerPoint Viewer and are contained in ZIP file archives. You’ll need to first extract the files, then use the enclosed viewer (or your copy of PowerPoint) to view these slide shows.

PDFs

SmartFeed™ Flyer

This four-page flyer is our standard introductory document. It explains the capabilities of the SmartFeed™ system and the three different models available. (0.5 MB)

Steps to Success

A one-page version of the Steps to Success diagram on the left-hand side of this Web page — the methodology used by the SmartFeed™ chemical conditioning process to ensure your project meets expected results. (0.1 MB)

Rapid Dewatering Test (RDT)

Explains the steps in the Rapid Dewatering Test, the first test in the SmartFeed™ Steps to Success methodology, which establishes the proper polymers to use in your project and the baseline dose rate. (0.6 MB)

Pressure-Geotube® Dewatering Test (P-GDT)

The P-GDT test is a small-scale simulation of your dewatering project. This test establishes the baseline parameters used by the SmartFeed™ system — parameters that are adjusted in real-time based on certain changes in project parameters. (0.6 MB)

P-GDT vs. Hanging Bag Test

This document explains the benefit of using the P-GDT test, rather than the traditional hanging bag test, when establishing baseline standards for polymer-assisted slurry dewatering. (0.1 MB)

Case Studies

Brookhaven National Laboratory

Brookhaven is a multi-program national laboratory operated by Brookhaven Science Associates for the U.S. Department of Energy (DOE). BNL reviewed many technologies and found TenCate™ Geotube® engineered textiles with SmartFeed™ chemical conditioning had the capability to meet project goals. (0.2 MB)

In-Barge Dewatering

Geotube® containers were adapted to operate completely on barges, adjacent to the site. The patent-pending SmartFeed™ system provided automated polymer mixing, injection and real-time performance data for the project.

Kennecott Mine

Kennecott Mine in Magna, Utah requested an alternate method to excavation and open-air drying of tailing. The tailing had recoverable metal benefits if dry ore was 60% solids, using a conditioning agent that would not interfere with the copper cathode process. The consolidated ore within the Geotube® containers exceeded 60% dry solids with a capture rate of 99.3% in the returning filtrate. The Geotube® structures provided protection from rewetting and protection from airborne particulate migration.

Weymouth, MA Alum

Weymouth, Massachusetts is expanding its water treatment facility and discontinuing the use of alum sludge containment ponds. It needed to remove alum sludge and sediment from the reservoir where containment ponds decant was located. Water quality resulting from the SmartFeed & trade chemical conditioning process had a high capture rate resulting in 24 NTUs discharge with cake solids achieving 38% dry solids after several weeks of drainage.

Weymouth, MA Harbor

The SmartFeed™ system was used to inject polymers into dredged slurry containing contaminated sediments from the harbor; the conditioned slurry was then pumped into Geotube® containers. The SmartFeed™ system filtered and treated the hydraulically dredged sediments at a rate of 3,500 gpm. This separation technology cleaned the water and removed the need for further treatment.

All documents and slide shows listed here are available via postal mail. If you’d like to receive a copy via postal mail, please contact Jim Meagher, 207-741-2955.

Smartfeed™ Steps to Project Success

1. Customer Application

Sludge or Slurry Dewatering Project that Requires Chemical Conditioning

2. RDT Testing

Confirms Chemical Selection Program for Geotube® Application

3. P-GDT Testing

Simulation of Full-Scale Geotube® Application

4. Geotube® Estimators

Provide Project Parameters Resulting from RDT / P-GDT Testing

5. SmartFeed™ And Geotube®

SmartFeed™ System Maintains Parameters Throughout Project; Geotube® ISO-Compliant Textile Manufactured to Test Specs

6. Project Success

Full Reporting of Individual Geotube® Container Performance Provides Risk Management Benefits

Questions?
Contact James E. Meagher
207-741-2955
207-751-4416 (cell)
860-767-8256 x. 136 (office)
[email protected]